Monthly Archives: April 2015
(The Art Bead Scene post is one click down)
Every month Erin Prais-Hintz gives us an amazing design challenge. The challenges have ranged from photos of dragonflies, to short movies and this month: Architecture.
When I saw this building, and the others in the challenge, I knew I had to make earrings with Dinosaur Bone. And not just any Dinosaur Bone, Opalized Dinosaur Bone.
In medical school I learned that the hip bone is “spongy” inside. It is not solid bone but has “trabeculae”, long arches of bone in its spongy core. The arches are virtually identical to the arches architects have used over the centuries to create the supports for cathedrals and for modern buildings like the one above.
If you are a nerd like me, you are going “duh” because the laws of physics apply equally to supporting bone and supporting the roofs of buildings.
Here is an X-ray of a hip bone. The image is reversed, so the bone shows black. Do you see the swooping, curved lines?
Here is a drawing that shows the lines that support the bone:
If you go to http://www.earrings-everyday.blogspot.com and look at all of the photos Erin posted, YOU WILL SEE THESE SAME LINES AND CURVES IN THE LOAD-BEARING WALLS OF EVERY ONE OF THE BUILDINGS in the challenge.
I am in year two of a five year plan to create gorgeous polymer clay opals.
When Erin posted the April Challenge, I had just seen this photo of Opalized Dinosaur Bone and pinned it to my “Opals to Polymerize” Pinterest board.
This fossil is a tiny piece of a dinosaur bone, so you don’t see the swooping lines we’d see if we had an X-ray of the dinosaur’s whole hip bone.
Here are the earrings I made:
I really had fun making these. I created two shades of green opal, two of blue and one of violet. I mixed tiny shreds of these colors into five different color combinations. I wrapped the green ones in Raw Umber Premo and the blue ones in Burnt Umber. If you look closely you can see how this enhanced the natural, organic feel to the piece.
The opal clay sparkles and twinkles just like mineral opal.
I used dyed jade beads as drops below the Opalized Dinosaur Bone. It’s translucency enhances the mineral feel to the earrings.
Here is another shot. The photo finishing to bring up the sparkle of the opal made my hands look a bit blue.
Join me on a trip down memory lane:
This is one of my early pieces, a pendant of Fossilized Dinosaur Bone, in this case the spaces in the spongy bone of the dinosaur filled with the mineral Apatite, Fools’ Gold. This is my interpretation in polymer. I have one of these available to sell. Message me at http://www.susandolphindelaney.etsy.com if you are interested.
This piece, a small pendant, is very dear to me. The green clay is my very first successful batch of opal clay. I’d been playing with a technique which hadn’t worked and I was processing the clay so that I could turn it into Beads of Courage for kids with cancer, and voila, there it was. I had discovered the next step in making beautiful opals from polymer.
This is another pendant, from my second batch of opal clay. I’d seen an amazing fossil: Opalized Snakeskin, in these colors. I had to try to make it.
Thanks for following my journey.
I am so grateful to Erin for creating these challenges. I always enjoy them, but I must say the deep nerdyness involved in this one kept a grin on my face the whole time I worked.
Art Bead Scene offers a painting each month as a prompt to create beads and jewelry.
The painting this month is Self Portrait with Thorn Necklace and Hummingbird, painted by Frida Kahlo in 1940.
So many of Kahlo’s paintings focus on her physical suffering as a result of terrible injuries in a bus accident.
Instead of the suffering I chose to focus on Frida as an Artistic Goddess and created beads and then earrings derived from the Jaguar in the painting. I call the beads Eye of the Jaguar Goddess Beads.
I used my emerald Opal polymer clay and layered it with black and translucent black polymer to create the Eye of the Jaguar Goddesses. They shimmer and reflect light like mineral opals. I topped them with a pair of emerald shaped vintage beads collected in Santa Fe, NM. The pale emerald beads sing with the opal clay.
Here are the earrings:
I am so grateful to Art Bead Scene ( http://www.artbeadscene.blogspot.com ) for these monthly challenges. I grow so much as an artist as I respond to the challenges.
My mother, Ethel Delaney, worked at NASA Goddard, just outside of DC.
After Apollo 11, which put men on the moon, Spock and Kirk came to NASA Goddard to thank the employees for their help with the mission.
Spock put a gold-plated charm of the lunar lander into Mother’s hand. She was thrilled to the point of speechlessness (not a usual condition for her!) She gave the charm to me and I cherished it. I planned to give it to my own future child.
It was not to be. I lost my little lunar lander charm in a house fire shortly before I became pregnant with my daughter.
Years later, I was able to obtain a modern version of the LEM from the Space Store and give it to her.
On the day that Spock died, February 27, 2015, I went online to find a photo of the charm to post on Facebook with the story of Mom and Spock. To my delight, one of the original charms was available from an Etsy shop!! I ordered it.
The charm has been very well loved. It looks like it was worn every single day.
I made this pair of earrings using it. The left earring has four little chains, echoing the feet of the LEM.
I wear the earrings with this necklace and bracelet, which have the same color of Swarovski crystals in them, along with dozens of other beads including two sizes of citrine; three types of vintage beads that I collected in Santa Fe; Swarovski pearls in two shades of gold; Swarovski rondelles in three shades of gold; a beaded bead from Barcelona; a few deep beige cats eye beads and some two-toned, sun face beads.
I cannot tell you how wonderful it is to have my “Spock charm” back!